OpenAPS cant connect to Medtronic554 pump

Hello,

I need to use OpenAPS to add my pump knowledge (European Medtronic 554 Paradigm Veo) to my Nightscout server.

I simply need to have the pump values (bolus, basal, and so forth) on-line for higher monitoring. Because the firmware of the pump is 3.1 (EU), I’m conscious that I wont be capable to have a closed loop.

My Nightscout server is linked to my Dexcom G6 and working. I already put in a rig (RaspberryPi+HAT) with the most recent OpenAPS software program (oref0 0.7.0). The rig is succesfully pulling the CGM knowledge from Nightscout.

My Downside:

The rig cant hook up with the pump. All settings appear OK (i.e. pump ID, and so forth). May you assist me with that?

EDIT:

I simply observed that the pump-looplog (see under) says that the pump is about in "% basal kind". That is true, since I wished to make certain that the pump wouldnt loop. How might the rig know that? Does this imply that the rig is definitely pulling knowledge from the pump?

———-

Right here some data I get from the rig by way of SSH:

pump-looplog:

root@xxxx:~/myopenaps# pump-looplog Couldn't refresh_pumphistory_and_meal oref0-pump-loop failed. pump_loop_completed greater than 15m previous; ready for 41 s silence earlier than mmtuning "HAT Show Up to date" Listening for 41s: .No interfering pump comms detected from different rigs (this can be a good factor!) Persevering with oref0-pump-loop at Thu 11 Jul 17:04:10 CEST 2019 Listening for 41 s silence earlier than mmtuning: Listening for 41s: .No interfering pump comms detected from different rigs (this can be a good factor!) Persevering with oref0-pump-loop at Thu 11 Jul 17:04:53 CEST 2019 mmtune: "868.550", 3, -60 No wait required. If pump and rig are shut sufficient, this error normally self-resolves. Stand by for the subsequent loop. Unsuccessful oref0-pump-loop at Thu 11 Jul 17:05:42 CEST 2019 Error: pump is about to % basal kind. The pump gained’t settle for non permanent basal charges on this mode. Please change the pump to absolute u/hr so non permanent basal charges will then be capable to be set. "HAT Show Up to date" Beginning oref0-pump-loop at Thu 11 Jul 17:12:22 CEST 2019 with 9 second wait_for_silence: Ready as much as four minutes for brand spanking new BG: First loop: not ready Listening for 9s: .No interfering pump comms detected from different rigs (this can be a good factor!) Persevering with oref0-pump-loop at Thu 11 Jul 17:12:33 CEST 2019 Preflight OK. Profile lower than 60m previous; Profile legitimate. Pump historical past up to date via 2019-07-11T16:44:59+02:00 with Zero new data; Couldn't invoke_pumphistory_etc - persevering with Retry 1 of refresh_pumphistory_and_meal Pump historical past up to date via 2019-07-11T16:44:59+02:00 with Zero new data; Couldn't invoke_pumphistory_etc - persevering with Listening for 8s: .No interfering pump comms detected from different rigs (this can be a good factor!) Persevering with oref0-pump-loop at Thu 11 Jul 17:13:07 CEST 2019 Retry 2 of refresh_pumphistory_and_meal Pump historical past up to date via 2019-07-11T16:44:59+02:00 with Zero new data; Couldn't invoke_pumphistory_etc - persevering with Listening for 9s: .No interfering pump comms detected from different rigs (this can be a good factor!) Persevering with oref0-pump-loop at Thu 11 Jul 17:13:27 CEST 2019 Retry Three of refresh_pumphistory_and_meal Pump historical past up to date via 2019-07-11T16:44:59+02:00 with Zero new data; Couldn't invoke_pumphistory_etc - persevering with Couldn't refresh_pumphistory_and_meal oref0-pump-loop failed. pump_loop_completed greater than 15m previous; ready for 26 s silence earlier than mmtuning "HAT Show Up to date" Listening for 26s: .No interfering pump comms detected from different rigs (this can be a good factor!) Persevering with oref0-pump-loop at Thu 11 Jul 17:14:04 CEST 2019 Listening for 26 s silence earlier than mmtuning: Listening for 26s: .No interfering pump comms detected from different rigs (this can be a good factor!) Persevering with oref0-pump-loop at Thu 11 Jul 17:14:32 CEST 2019 mmtune: "868.550", 3, -46 No wait required. If pump and rig are shut sufficient, this error normally self-resolves. Stand by for the subsequent loop. Unsuccessful oref0-pump-loop at Thu 11 Jul 17:14:58 CEST 2019 Error: pump is about to % basal kind. The pump gained’t settle for non permanent basal charges on this mode. Please change the pump to absolute u/hr so non permanent basal charges will then be capable to be set. "HAT Show Up to date" 

grep mmtune /var/log/openaps/pump-loop.log:

root@xxxx:~# grep mmtune /var/log/openaps/pump-loop.log mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: mmtune: Binary file /var/log/openaps/pump-loop.log matches 

openaps use pump mannequin:

root@xxxxxx:~/myopenaps# openaps use pump mannequin Traceback (most up-to-date name final): File "/usr/native/bin/openaps-use", line 63, in <module> app( ) File "/usr/native/lib/python2.7/dist-packages/openaps/cli/__init__.py", line 51, in __call__ self.run(self.args) File "/usr/native/bin/openaps-use", line 57, in run output = app(args, self) File "/usr/native/lib/python2.7/dist-packages/openaps/makes use of/__init__.py", line 92, in __call__ return self.technique.chosen(args)(args, app) File "/usr/native/lib/python2.7/dist-packages/openaps/makes use of/__init__.py", line 31, in __call__ return self.technique(args, app) File "/usr/native/lib/python2.7/dist-packages/openaps/makes use of/use.py", line 44, in __call__ self.before_main(args, app) File "/usr/native/lib/python2.7/dist-packages/openaps/distributors/medtronic.py", line 62, in before_main self.setup_medtronic( ) File "/usr/native/lib/python2.7/dist-packages/openaps/distributors/medtronic.py", line 161, in setup_medtronic self.uart.open( ) File "/usr/native/lib/python2.7/dist-packages/decocare/stick.py", line 874, in open log.data('%s' % self.product_info( )) File "/usr/native/lib/python2.7/dist-packages/decocare/stick.py", line 515, in product_info return self.question(ProductInfo) File "/usr/native/lib/python2.7/dist-packages/decocare/stick.py", line 509, in question return self.course of( ) File "/usr/native/lib/python2.7/dist-packages/decocare/stick.py", line 490, in course of uncooked = self.send_force_read( ) File "/usr/native/lib/python2.7/dist-packages/decocare/stick.py", line 606, in send_force_read self.hyperlink.write(reader.format( )) File "/usr/native/lib/python2.7/dist-packages/decocare/hyperlink.py", line 47, in write r = self.serial.write( string ) File "/usr/native/lib/python2.7/dist-packages/serial/serialposix.py", line 531, in write elevate portNotOpenError serial.serialutil.SerialException: Making an attempt to make use of a port that's not open 

submitted by /u/John_D_T
[comments]

Leave a Comment

Your email address will not be published. Required fields are marked *